Frank makes

It was time to put the stove into position in the kitchen. The stove had been stored in the living room...

I built the cabinet for the sink wider than necessary thinking I would need some adjustability in the placement of the sink....

The kitchen windows were in need of repair. One of the two windows had a crack running through the glass and the...

There was a lot more fitting and fussing with the cabinets to get them into place then I had originally thought. ...

I had to repair the kitchen walls to get ready for the cabinets. I started by patching the holes in the...

I have made a frame for the tops of the cabinets out of 3/4 inch birch plywood. This frame will help...

I made the cabinet drawers from half inch birch plywood. I made the side pieces from some of the scraps leftover...

I have made a motorized stop motion dolly. I finally found a very slow electric motor. It rotates at 3.5 revolutions...

I made the cabinet carcass from maple veneer plywood. I made the bottom pieces first to make sure they fit in...

I made the cabinet bases from salvaged pieces of the original kitchen. The bases will house some plumbing and electrical. ...